| dc.contributor.advisor | Sabri, M | |
| dc.contributor.author | Guntoro, Muhammad Ganang Dwi | |
| dc.date.accessioned | 2025-04-23T01:25:45Z | |
| dc.date.available | 2025-04-23T01:25:45Z | |
| dc.date.issued | 2025 | |
| dc.identifier.uri | https://repositori.usu.ac.id/handle/123456789/103315 | |
| dc.description.abstract | This study aims to analyze the quality and characteristics of filament produced from detergent bottle plastic waste made of HDPE (High-Density Polyethylene) using the pultrusion method. HDPE plastic waste was chosen due to its strong mechanical properties and high-temperature resistance, making it a potential candidate as a filament raw material for 3D printers. This research utilized various temperature and pulling speed variations in the pultrusion process to determine the optimal parameters for producing high-quality filament. The results showed that a temperature of 120°C with a pulling speed of 4 mm/s produced filament with the highest tensile strength, reaching 96.781 MPa. Thus, this method can serve as an innovative solution for recycling HDPE plastic waste and reducing environmental impact. | en_US |
| dc.language.iso | id | en_US |
| dc.subject | 3D Filament | en_US |
| dc.subject | HDPE | en_US |
| dc.subject | Pultrusion | en_US |
| dc.subject | Plastic Recycling | en_US |
| dc.subject | Filament Quality | en_US |
| dc.title | Analisis Kualitas Dan Karakteristik Limbah Plastik Botol Deterjen (HDPE) Sebagai Sumber Filamen Pada Printer 3D Dengan Metode Pultrusi | en_US |
| dc.title.alternative | Analysis Of The Quality And Characteristics Of Detergent Bottle Plastic Waste (HDPE) As a Filament Source For 3D Printers Using The Pultrusion Method | en_US |
| dc.type | Thesis | en_US |
| dc.identifier.nim | NIM200401164 | |
| dc.identifier.nidn | NIDN0023066305 | |
| dc.identifier.kodeprodi | KODEPRODI21201#Teknik Mesin | |
| dc.description.pages | 95 Pages | en_US |
| dc.description.type | Skripsi Sarjana | en_US |
| dc.subject.sdgs | SDGs 4. Quality Education | en_US |
