• Login
    View Item 
    •   USU-IR Home
    • Faculty of Engineering
    • Department of Civil Engineering
    • Master Theses
    • View Item
    •   USU-IR Home
    • Faculty of Engineering
    • Department of Civil Engineering
    • Master Theses
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Analisa Core Wall Dua Cell akibat Beban Torsi pada Bangunan Tinggi

    View/Open
    Fulltext (948.5Kb)
    Date
    2010
    Author
    Siregar, Syahrir Arbyn
    Advisor(s)
    Tarigan, Johannes
    Barus, Sanci
    Metadata
    Show full item record
    Abstract
    As a stiffener on a tall building which is basically also behaves as a core building. functions is to eliminate lateral forces such as earthquake forces, wind forces and torque forces used Core Two Cell Wall. Two Cell Wall Core is conditioned as a thin beam with free-flops structural system and analyzed with St. Venant Torque system or shell St. Venant force. Torsional stress obtained at the surface width is τ =7.20 N/mm2 , validated with FEM results for the triangular elements τ =1.82 N/mm2 and for quadrilateral elements τ =1.30 N/mm2 . There are differences with triangular elements for 33,33 % and with the rectagular elements of 51,85 %, was between different FEM own 27,78 %. Torque tension at the surface of the narrow result is τ =2.70 N/mm2 , validated with FEM for triangular τ =3.50 N/mm2 and quadrilateral elemens, τ =4.00 N/mm2 . There is a difference with triangular elements for 22,86 % and 32,50% for quadrilateral elements, are different between the FEM alone 12,50%.
     
    Sebagai pengaku pada bangunan tinggi yang pada dasarnya juga berperilaku sebagai inti bangunan yang fungsinya adalah untuk mengeliminasi gaya-gaya lateral seperti gaya gempa, gaya angin maupun gaya torsi dipakai Core Wall Dua Cell. Core Wall Dua Cell ini dikondisikan seperti balok tipis dengan sistem struktur jepit bebas dan dianalisis dengan sistem torsi St. Venant ataupun gaya shell St. Venant. Tegangan torsi yang diperoleh pada permukaan lebar adalah τ = 2.7 N/mm2, divalidasi dengan hasil FEM untuk elemen segitiga τ = 1.8 N/mm2 dan untuk elemen segi empat τ = 1.3 N/mm2. Terdapat perbedaaan dengan elemen segitiga sebesar 33.33%, dan dengan elemen segi empat sebesar 51.85%, sedang antara FEM sendiri berbeda 27.78%. Tegangan Torsi pada permukaan sempit hasilnya adalah τ = 2.7 N/mm2, divalidasi dengan hasil FEM untuk elemen segitiga τ = 3.5 N/mm2 dan dengan elemen segi empat τ = 4 N/mm2 Terdapat perbedaan dengan elemen segitiga sebesar 22.86% dan dengan elemen segi empat sebesar 32.5%; sedang antara FEM sendiri berbeda 12.5%.

    URI
    http://repositori.usu.ac.id/handle/123456789/37029
    Collections
    • Master Theses [246]

    Repositori Institusi Universitas Sumatera Utara (RI-USU)
    Universitas Sumatera Utara | Perpustakaan | Resource Guide | Katalog Perpustakaan
    DSpace software copyright © 2002-2016  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    Atmire NV
     

     

    Browse

    All of USU-IRCommunities & CollectionsBy Issue DateTitlesAuthorsAdvisorsKeywordsTypesBy Submit DateThis CollectionBy Issue DateTitlesAuthorsAdvisorsKeywordsTypesBy Submit Date

    My Account

    LoginRegister

    Repositori Institusi Universitas Sumatera Utara (RI-USU)
    Universitas Sumatera Utara | Perpustakaan | Resource Guide | Katalog Perpustakaan
    DSpace software copyright © 2002-2016  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    Atmire NV